Here is the Gears of War costume I made for the NYCC event.

Below
is the long process for making this. It was the first costume I have
ever made and didn't have too much room for error, so it was basically
measure twice, cut once and pray it fits.
I started with a hard to find adult size motorcycle vest
Cut and drilled holes for the front extension.

Added mesh and plastic to front part of vest.
Getting ready to add clay.

Then I mounted on a hook where the second gun is going to go.

I cut out a template of of where the backpack is going to have its parts onto plastic.
The I cut and mounted on the plastic peices onto the plastic back.

Then I drilled holes and mounted the plastic backpack to the back of the vest.
Mounted on mesh to the backpack.

Getting ready to add clay to back.

Clay added to front.
Clay added to back.
The clay eneded up cracking pretty bad after it dried. I had to use filler and then smooth it down. Here is the primed paint.

Here is the beginning of the shin guards.
Beginning of thigh gaurds.
Beginning of front guard.
Work being done on the belt.
Shin guards being taped while being glued.

Thigh guards being taped while glued.
Belt with front guard.
Shoulder guards taped and glued.
New to IFX?
Check these out:
Introduce YourselvesDaily Sketchbook Critique your artFightClub